
PropGlide™ Small Kit $199
PCK-250 PropGlide™ 250ML Small Kit contains:
- 120ML Primer Base
- 30ML Primer Hardener
- 100ML Clear Topcoat
The PropGlide™ PCK-250 Small Kits is not a prop antifoulant, it is a foul release coating system. It contains no harmful biocides, and performs because it is a super slick coating! When PropGlide™ is applied to your propeller(s) and running gear it will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time.
Increase in Prop Speed Means a Faster Vessel
PropGlide™ dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide™ you will achieve higher RPM and vessel speed.
Improved Fuel Efficiency
Clean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!
Biocide-Free and Environmentally Friendly
PropGlide™ is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!
Ease of Application
PropGlide™ is easy to apply for Do-It-Yourselfer’s and not just for the professional applicator.
The PropGlide™ 250ML Small Kit contains:
- 120ML Primer Base
- 30ML Primer Hardener
- 100ML Clear Topcoat
This 250ML Small Kit will cover: Propellers 18-24 inches (33-60CM) with 3-4 blades and running gear.
PropGlide™ Small Size 250ML Kit contains 25% More Product Volume than Competitive Prop Speed Kits
PropGlide™ Etching Primer Physical Properties
Mixing Ratio: Primer Base (Part 1) : Primer Hardener (Part 2) = 4 : 1 by volume
Color:
Primer Base (Part 1)Yellow
Primer Hardener (Part 2) : Clear
Dry Film Thickness: 8 microns
Drying Time: 5-15 minutes touch dry (temperature dependent)- 1 hour hard dry @ 20°C/68°F
Painting Interval: Apply PropGlide Clear TopCoat when Etching Primer is just touch dry
Pot Life: 8 hrs @ 20°C/68°F
PropGlide™ Clear Top Coat Physical Properties
Binder type: Silicone Polymer
Solvent: Xylene
Colour: Clear coating
Finish: Glossy
Dry time: 45 minutes touch dry ; 8 hours hard dry @ 20°C
Recommended film build: 75 microns per coat
Thinning: N/A
Clean up: Acetone
Shelf life: Unopened: 3 years+. Once opened: 12 Hours
